MAHKOL – Modified Polysulfide Edge Sealant (30+3=33K)
- Two-component Secondary Sealant (A+B)
- Suitable for automatic extruder
- Excellent Humidity resistance.
- Long-term Durability for IGU Product.
- Good Elongation and peal Straight
Typical Properties Include
PROPERTY | SPECIFICATION |
|---|---|
Mixing | 9 + 1 |
Gel Time | 20 – 60 Minutes |
Elongation | Excellent |
Hardness | Roughly Shore A 25-35For Softer grades |
Service temperature | Approximately −5 to +30°C for many construction grades |
cure | Generally 24Hours |
Joint width | Often around 5–50 mm |
Chemical resistance | Good resistance to water, fuels, oils and various chemical |
